Profit Margin and Return on Investment

Oct 13, 2025 by ludoplayers7.com 47 views

# Pre-Design Factory Manufacturing Glycerol from Coconut Natural Oil (CNO) with a Capacity of 20,000 Tons/Year

Introduction

The production of glycerol from Coconut Natural Oil (CNO) has gained significant attention in recent years due to its increasing demand in various industries. Glycerol is a versatile compound used in the production of soaps, cosmetics, pharmaceuticals, and other products. In this article, we will discuss the pre-design of a factory that manufactures glycerol from CNO with a capacity of 20,000 tons per year.

Factory Overview

The factory planned to produce glycerol from CNO has a production capacity of up to 20,000 tons per year. The process of making glycerol involves a reaction between CNO and water in the hydrolysis column, followed by the separation of fatty acids from glycerol using decanters. Furthermore, glycerol will be refined through the use of the decanter and two evaporator units. The factory is planned to operate for 300 days a year and will be located in Teluk Nibung, Asahan Regency, North Sumatra, with an area of 13,110 m².

Organizational Structure

The factory will require a total of 148 people to run its operations, which will be organized in the organizational structure of the line system under the leadership of a General Manager. This structure will ensure that the factory operates efficiently and effectively, with clear lines of communication and decision-making.

Factory Economic Analysis

In economic analysis, some important parameters that show the economic feasibility of this factory have been calculated. Initial investment capital is estimated at around Rp 1,072,945,161,793. The production costs that must be incurred reached Rp 1,528,271,401,178, while the expected sales results reached Rp 1,896,050,843,719. From this calculation, the net profit generated is around Rp. 257,463,109,778.

Profit Margin and Return on Investment

The factory profit margin is recorded at 19%, which shows that the factory has the potential to produce significant profits from each unit produced. In addition, Bre-Event Point is at 25.89%, indicating that the factory can cover operational costs after reaching this production level. Return on Investment (ROI) also looks profitable with a figure of 23.99%, which shows that every investment made will generate profits in a relatively short time.

Return on Network and Pay Out Time

Return on Network (RON) which amounted to 39.99% shows the factory efficiency in producing relative profits on existing investment networks. The pay out time (pay out time) is predicted to be around 4.17 years, which shows that this factory can again produce initial capital in a fairly fast time.

Internal Rate of Return

Internal Rate of Return (IRR) which reached 32.106% shows that this project is very feasible to implement. This high IRR indicates that the factory will generate significant returns on investment, making it an attractive option for investors.

Conclusion

Of all the analyzes above, it can be concluded that the glycerol manufacturing factory from Coconut Natural Oil (CNO) is not only feasible to be established but also has good prospects in the market. With the increasing demand for glycerol-based products, as well as a promising profit potential, this factory can be one of the drivers of the local and national economy.

Importance of Preparation

It is essential to prepare all aspects related to factory operation, ranging from location selection, labor recruitment, to managing the production process in order to operate optimally and efficiently. The whole plan indicates that investment in the glycerol manufacturing factory is a strategic step in the development of a sustainable coconut-based industry.

Future Prospects

The future prospects of this factory look promising, with the potential to expand its production capacity and explore new markets. With the increasing demand for glycerol-based products, this factory is well-positioned to capitalize on this trend and become a leading player in the industry.

Recommendations

Based on the analysis above, we recommend that the factory proceed with its plans to establish a glycerol manufacturing facility from CNO. With careful planning and execution, this factory has the potential to become a significant contributor to the local and national economy.

Limitations

While this analysis has shown that the factory is feasible to establish, there are some limitations that need to be considered. These include the initial investment capital required, the production costs, and the potential risks associated with the production process. However, with careful planning and management, these limitations can be mitigated, and the factory can operate efficiently and effectively.

Conclusion

In conclusion, the pre-design of a factory that manufactures glycerol from Coconut Natural Oil (CNO) with a capacity of 20,000 tons per year has shown that it is feasible to establish and has good prospects in the market. With careful planning and execution, this factory can become a significant contributor to the local and national economy.
# Frequently Asked Questions (FAQs) about Pre-Design Factory Manufacturing Glycerol from Coconut Natural Oil (CNO)

Introduction

In our previous article, we discussed the pre-design of a factory that manufactures glycerol from Coconut Natural Oil (CNO) with a capacity of 20,000 tons per year. In this article, we will answer some of the frequently asked questions (FAQs) about this project.

Q: What is the purpose of the factory?

A: The purpose of the factory is to produce glycerol from Coconut Natural Oil (CNO) with a capacity of 20,000 tons per year.

Q: What is the production process?

A: The production process involves a reaction between CNO and water in the hydrolysis column, followed by the separation of fatty acids from glycerol using decanters. Furthermore, glycerol will be refined through the use of the decanter and two evaporator units.

Q: Where will the factory be located?

A: The factory will be located in Teluk Nibung, Asahan Regency, North Sumatra, with an area of 13,110 m².

Q: How many people will be required to run the factory?

A: A total of 148 people will be required to run the factory, which will be organized in the organizational structure of the line system under the leadership of a General Manager.

Q: What is the estimated initial investment capital?

A: The estimated initial investment capital is around Rp 1,072,945,161,793.

Q: What is the expected sales result?

A: The expected sales result is around Rp 1,896,050,843,719.

Q: What is the net profit generated?

A: The net profit generated is around Rp. 257,463,109,778.

Q: What is the factory profit margin?

A: The factory profit margin is recorded at 19%.

Q: What is the Bre-Event Point?

A: The Bre-Event Point is at 25.89%, indicating that the factory can cover operational costs after reaching this production level.

Q: What is the Return on Investment (ROI)?

A: The Return on Investment (ROI) is 23.99%, which shows that every investment made will generate profits in a relatively short time.

Q: What is the Return on Network (RON)?

A: The Return on Network (RON) is 39.99%, which shows the factory efficiency in producing relative profits on existing investment networks.

Q: What is the pay out time (pay out time)?

A: The pay out time (pay out time) is predicted to be around 4.17 years, which shows that this factory can again produce initial capital in a fairly fast time.

Q: What is the Internal Rate of Return (IRR)?

A: The Internal Rate of Return (IRR) is 32.106%, which shows that this project is very feasible to implement.

Q: What are the future prospects of the factory?

A: The future prospects of the factory look promising, with the potential to expand its production capacity and explore new markets.

Q: What are the recommendations for the factory?

A: Based on the analysis above, we recommend that the factory proceed with its plans to establish a glycerol manufacturing facility from CNO. With careful planning and execution, this factory has the potential to become a significant contributor to the local and national economy.

Q: What are the limitations of the factory?

A: While this analysis has shown that the factory is feasible to establish, there are some limitations that need to be considered. These include the initial investment capital required, the production costs, and the potential risks associated with the production process.

Q: What is the conclusion of the analysis?

A: In conclusion, the pre-design of a factory that manufactures glycerol from Coconut Natural Oil (CNO) with a capacity of 20,000 tons per year has shown that it is feasible to establish and has good prospects in the market. With careful planning and execution, this factory can become a significant contributor to the local and national economy.