Software Testing Procedure

Oct 13, 2025 by ludoplayers7.com 101 views

Software Testing Procedure

Prerequisites

Before proceeding with the test serial connection, ensure that you have the necessary hardware and environment setup.

Hardware

RadioBoard Devices: Connect one or more RadioBoard devices via USB to the computer. This will enable the serial connection test.

Environment

Dependencies: Verify that you have the necessary dependencies installed to build and run the software. This may include compilers, libraries, and other development tools.

Test Steps

To test the serial connection, follow these steps:

Step 1: Open a Terminal Window

Open a terminal window on your computer. This will provide a command-line interface for executing the test steps.

Step 2: Navigate to the Build Directory

Navigate to the build directory using the cd command. For example:

cd ~/2024_C_GS_SOFTWARE/2024_C_GS_CONTROL/build

This will change the current working directory to the build directory.

Step 3: Build the Project

Execute the build command to compile the project:

make build

This will build the project and generate the necessary binaries.

Step 4: Run the Server

Launch the server by executing the FirehornServer command:

./FirehornServer

This will start the server and establish a serial connection.

Expected Results

When the server is run and the serial port opens successfully, you should see a log message similar to:

[07h-52m-06s] [INFO] [Server] [SerialActions] [Serial port open on <port>],

This indicates that the serial port has been opened successfully. If you see an error message instead, it may indicate an issue with the way the port was opened. In this case, double-check that the port name printed in the log message is the expected port name.

To verify the serial connection, you can use the screen command as follows:

screen <portname> <baudrate>

This will read the serial input received and provide a way to verify the connection.

Troubleshooting

If you encounter issues during the test serial connection, refer to the following troubleshooting steps:

Check Port Name: Verify that the port name printed in the log message is the expected port name.
Check Baudrate: Ensure that the baudrate used is correct for the serial connection.
Check Serial Cable: Verify that the serial cable is properly connected to the RadioBoard device and the computer.

By following these test steps and troubleshooting tips, you can successfully test the serial connection and ensure that your software is functioning correctly.

Conclusion

Q: What is the purpose of testing the serial connection?

A: The purpose of testing the serial connection is to ensure that the software can communicate with the RadioBoard device via the serial port. This is crucial for applications that rely on serial communication, such as data transfer, control systems, and more.

Q: What are the prerequisites for testing the serial connection?

A: The prerequisites for testing the serial connection include:

Hardware: Ensure that one or more RadioBoard devices are connected via USB to the computer.
Environment: Verify that you have the necessary dependencies installed to build and run the software.

Q: How do I navigate to the build directory?

A: To navigate to the build directory, use the cd command followed by the path to the build directory. For example:

cd ~/2024_C_GS_SOFTWARE/2024_C_GS_CONTROL/build

Q: What is the build command, and how do I execute it?

A: The build command is used to compile the project and generate the necessary binaries. To execute the build command, use the make command followed by the build target. For example:

make build

Q: How do I launch the server and establish a serial connection?

A: To launch the server and establish a serial connection, use the FirehornServer command. For example:

./FirehornServer

Q: What are the expected results when testing the serial connection?

A: When testing the serial connection, you should see a log message similar to:

[07h-52m-06s] [INFO] [Server] [SerialActions] [Serial port open on <port>],

This indicates that the serial port has been opened successfully. If you see an error message instead, it may indicate an issue with the way the port was opened.

Q: How do I troubleshoot issues with the serial connection?

A: To troubleshoot issues with the serial connection, refer to the following steps:

Check Port Name: Verify that the port name printed in the log message is the expected port name.
Check Baudrate: Ensure that the baudrate used is correct for the serial connection.
Check Serial Cable: Verify that the serial cable is properly connected to the RadioBoard device and the computer.

Q: Can I use the `screen` command to verify the serial connection?

A: Yes, you can use the screen command to verify the serial connection. To do this, use the following command:

screen <portname> <baudrate>

This will read the serial input received and provide a way to verify the connection.

Q: What are some common issues that may arise during serial connection testing?

A: Some common issues that may arise during serial connection testing include:

Port Name Mismatch: The port name printed in the log message may not match the expected port name.
Baudrate Mismatch: The baudrate used may not match the correct baudrate for the serial connection.
Serial Cable Issues: The serial cable may not be properly connected to the RadioBoard device and the computer.

By understanding these frequently asked questions and troubleshooting tips, you can ensure that your software is functioning correctly and that the serial connection is established successfully.